![background image](http://html1.mh-extra.com/html/legrand/kenall-luxtran-ltl-series/kenall-luxtran-ltl-series_installation-instructions_1871235001.webp)
www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
1
INSTALLATION INSTRUCTIONS
LTL_F-5595_091118
B
C
D
DETAIL B
SCALE 1 / 5
DETAIL C
SCALE 1 / 5
DETAIL D
SCALE 1 / 5
END
MIDDLE
HOUSING
STARTER
HOUSING
FIGURE 5
1/4-20" SREWS
END PLATE
LOCK
WASHER
MIDDLE HOUSING
1/4-20" SCREWS
LOCK WASHER
LOCK WASHER
1/4-20" SCREWS
Luminaires for Tunnel Applications
LUXTRAN
™
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION
PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT
AINSI QUE LES RISQUES INHÉRENTS. DISCONNECT POWER TO ALL CIRCUITS BEFORE WIRING FIXTURE. INSTALL IN
ACCORDANCE WITH ALL NATIONAL, STATE, AND LOCAL CODES. DO NOT CONNECT TO AN UNGROUNDED SUPPLY. READ ALL
FIXTURE MARKINGS AND LABELS TO ENSURE CORRECT INSTALLATION OF FIXTURE. SUPPLEMENTAL INSTRUCTIONS MAY BE
LOCATED ON THE FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET, REGARDING ORIENTATION, OR MOUNTING RESTRICTIONS.
SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
LTL SERIES
1. Rotate latches and open door.
2. Remove air-craft cables and remove door(s) completely.
3. Secure fixtures to wall or ceiling using user supplied hardware. 1.43” x .43” slots in mounting brackets are
provided.
The LuxTran LTL series luminaires contains sensitive electronics. Take care to avoid damage by improper handling or
static electricity discharge (ESD). Either type of damage could render the system inoperable or cause latent failure.
LuxTran LTL Series Luminaires are powered by RD700 distributed DC driver system; remotely-located for servicing
convenience.
FIGURE 1
DETAIL A
SCALE 1 :3
A
17.00 (5x)
10.00
1.43
.43
Figure 2
Figure 1
Row Mount View