background image

INS #

Brand Logo  

reversed out of 

black

INS #

IB521009EN

Installation Instructions - Archeon

TM

 Medium

Instructions d’installation – Archeon

MC

 Medium

Instrucciones de instalación - Archeon

TM

 Medium

IMPORTANT: 

Read carefully before installing fixture. Retain for future reference.

 

 

GENERAL:

 Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the 

attention of the delivery carrier. Compare the catalog description listed on the packing slip with the fixture label on the 

housing to assure you have received the correct material. 

SAFETY: 

This fixture must be wired in accordance with the National Electrical Code and applicable local codes and 

ordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure under 

installation section.

 

APPLICATIONS: 

This lighting fixture is designed for outdoor lighting services, and should not be used in area of limited 

ventilation or inside high ambient temperature enclosures. It must be stored in a dry location prior to installation. Do 

not expose lighting fixture to rain, dust or other environmental conditions prior to installation and insertion of photo 

control or shorting cap (if so equipped). Do not install the fixture near combustible materials or locate next to airflow 

blocking surfaces within 6 inches. Best results will be obtained if installed and maintained according to the following 

recommendations.

WARNING

Make Certain Power is OFF before starting installation 

or attempting any maintenance.

WARNING

Risk of Fire/Electric Shock. If not qualified, consult an 

electrician.

WARNING

Risk of Electric Shock – Disconnect power at fuse or 

circuit breaker before installing or servicing.

WARNING

Risk of Personal Injury – Fixture may become damaged 

and/or unstable if not installed properly. 

Do not mount luminaire within 6” of a combustible 

surface. 

Do not handle luminaire by the glass. Do not touch 

LEDs. 

WARNING

Risk of Burn – Disconnect power and allow fixture to 

cool before servicing.

ote:

N

These instructions do not claim to cover all 

details or variations in the equipment, procedure, 

or process described, nor to provide directions 

for meeting every possible contingency during 

installation, operation or maintenance. When 

additional information is desired to satisfy a 

problem not covered sufficiently for user’s purpose, 

please contact your nearest representative.  

ote:

N

This lighting fixture has been shipped complete 

with one of several mounting options. Please follow 

the installation instructions specific to the catalog 

part that you ordered. 

ote:

N

Care must be taken not to set lighting fixture down 

on optical lenses or lift the fixture in the lens area.  

ote:

N

Specifications and dimensions subject to change 

without notice. 

Summary of Contents for Streetworks Archeon Medium














Reviews: