24
! CAUTION
Danger due to insufficient fas-
tening!
When mounted incorrectly, the
light may fall down.
¾
The light must be mounted in a
stable position on the mounting
surface by means of screws or
other suitable adapter units!
¾
When using mounting elements
which have not been proposed
by the manufacturer, the user
has to verify their reliability!
¾
The light may only be mounted
on a surface suitable for mount-
ing!
¾
Mounting by a skilled electri-
cian only!
Mounting
Direct mounting
The light can be screwed directly
onto the housing by means of
self-tapping screws, see Fig. 51
on page 30.
Important information!
The light must be earthed
(functional earth)! To this
end, the light must be screwed to
a surface connected to functional
earth.
Mounting the holders
Drill pattern, see Fig. 52 on page 30.
Note:
For special models, the drill
pattern can differ from the standard
drill pattern.
Important information!
The light must be earthed on the
holder (functional earth)! To this
end, the light must be screwed
to a surface connected to
functional earth.
* self-tapping screw
M5 x 10 DIN 7500
Waldmann No. 407015112
Instructions For Use Machine Light MVAL 1 S(D)
“ONE LED”
ENG
Summary of Contents for ONE LED
Page 3: ...3 MVAL 1 S D ONE LED Fig 2 MVAL 1 S Fig 3 MVAL 1 SD...
Page 17: ...17 Anhang Gebrauchsanweisung Maschinenleuchte MVAL 1 S D ONE LED DEU...
Page 31: ...31 Appendix Instructions For Use Machine Light MVAL 1 S D ONE LED ENG...
Page 45: ...45 Annexe Mode d emploi Luminaire pour machine MVAL 1 S D ONE LED FRA...
