40
What to do if?
ENG
8. What to do if?
Problem
Possible causes
Corrective action
Luminaire is not lit.
Mains plug not
plugged in.
X
Plug the mains plug into a
socket.
The plug in the light
head has not been
connected correctly.
X
Check the plugs in the light
head.
LED module is defec-
tive.
X
Contact our service team.
Luminaire does not
respond to inputs.
Software function is
defective.
X
Restore the factory setting of
the luminaire. To do so, read the
operating instructions of Power
control, which can be found in
the service area of our home-
page www.waldmann.com.
The luminaire is flas-
hing when switched
on.
The light control is
being configured.
X
Wait until the luminaire is lit per-
manently.
Indirect light and
direct light are swit-
ched on with a time
delay.
The light control is
being adjusted.
X
Wait until the luminaire is lit per-
manently.
The luminaire does
not control the colour
temperature and the
illuminance of the
indirect light in the
course of the day.
VTL is off.
X
Switch VTL on, Kapitel 7.2 „Swit-
ching on and off“ auf Seite 37.
Memory card is mis-
sing or inserted incor-
rectly.
X
Insert the memory card into the
slot of the TIME module, Kapitel
3.7 „Inserting the SD card“ auf
Boost function has
been activated.
X
Deactivate the boost function,
Kapitel 7.4 „Activating and deac-
tivating the boost function“ auf
VTL operation has
been deactivated in
the parameter set-
tings.
X
Read the operating instructions of
Power control, which can be found
in the service area of our home-
page www.waldmann.com.