38
Functions of the luminaire
ENG
Switching the direct light on and off
X
Press the lower switch, siehe Fig. 19.
If you switch off the direct light, the light
control is deactivated. LUM CONNECT
MANAGE does not control the intensity
of the indirect light if the intensity in the
detection range of the daylight sensor
has changed.
The automatic switch-on and -off of the
luminaire remains activated depending
on the intensity in the room. The lumi-
naire switches off automatically if the
intensity of the daylight is sufficient.
7.3 Dimming
Dimming the indirect light
NOTE:
You cannot dim indirect light with
this luminaire.
Dimming the direct light
X
Press the lower switch and keep it
depressed, siehe Fig. 19.
After about one second, the luminaire
will change its brightness.
X
To change the dimming direction, press
the switch again and keep it depressed.
This will save the set brightness. The
next time the luminaire is switched on,
the brightness saved last will be set.
This completes the recalibration of the
light control.
7.4 Activating and deactivating
the boost function
Activating the boost function
X
Press the upper switch and keep it
depressed for at least one second,
siehe Fig. 19.
The indirect light is operated at the
maximum power.
The blue LED in the sensor system is lit.
VTL has been deactivated.
Deactivating the boost function
X
Press the upper switch and keep it
depressed for at least one second or
switch VTL off and on again, siehe
Fig. 19.
The blue LED in the sensor system is
not lit.
VTL has been activated.
The next time the luminaire is automa-
tically switched on, VTL will be swit-
ched on.