36
Functions of the luminaire
ENG
Manual inputs on the light, such as manual
switch-on and off, always take priority over
the automatic light management until the
detection range of the sensors is left for
ten minutes.
HFMD sensor
The presence sensor of the light manage-
ment system HFMD uses high frequency
technology and detects minimum move-
ments in its detection range.
Fig. 17: Detection range of the HFMD sensor.
PIR sensor
The motion detector of the light manage-
ment system PIR uses passive infrared
technology and detects larger movements
in its detection range.
Fig. 18: Detection range of the PIR sensor.
VTL
VTL is an autonomously working light
management system. VTL is used to simu-
late the natural course of daylight with
the corresponding colour temperature
and illuminance. This positively influences
hormone production and supports the bio-
logical rhythm in a natural way.
If you want to learn more about VTL,
simply scan this QR code or visit us at:
www.waldmann.com.
Parameterisation
You can adapt the LUM CONNECT
MANAGE light management systems to
your individual requirements: read the ope-
rating instructions of Power control which
can be found in the service area of our
homepage www.waldmann.com.
7. Operation
The indirect luminaire LAVIGO TWIN is
equipped with two light heads which can
be operated independently of one another.
The light management systems of the two
light heads work autonomously.
7.1 Operating elements
The light can be operated using both the
multifunction pushbutton (MFT) and the
keys on the sensors.
Fig. 19: Multifunction pushbutton operating ele-
ment.
Fig. 20: sensor operating element.
