33
Instructions For Use Wall Mounted Uplighter DUW 2xx(D)
"ATARO"
ENG
Mounting part 4 - Adjusting the light head
Fig. 16
16.2
16.1
14.3
16.4
Fig. 18
a
b
Removing the chassis
from the cover
If you want to take the chassis out
of the cover again, please proceed
as follows:
See Fig. 18.
m) Press one of the two upper
detent hooks toward the back
[a] and lift the chassis until it
comes loose.
n) Press the associated lower
detent hook toward the back
[b] and remove the chassis from
the cover frame.
Inserting the
light chassis
See Fig. 16.
j) Insert the chassis [16.1] from
the top into the cover frame
[16.2].
Note:
The connecting cable
[16.4] must point into the direc-
tion of the fastening rail [14.3].
k) Snap in chassis [16.1] first on
the right and then on the left.
Note:
The chassis [16.1] must
engage in the cover frame
[16.2].
l) Screw in oval-head screw [14.8]
with circlip [14.9] (see Fig. 14)!