32
Instructions For Use Wall Mounted Uplighter DUW 2xx(D)
"ATARO"
ENG
Mounting part 3 - Mounting the light head
Fig. 14b
14.3
14.2
Fig. 15
14.3
15.5
14.2
Fig. 14a
14.2
14.3 14.8 14.9 14.7
Hanging in the cover
See Figs. 14a and 14b.
e) Hang the cover [14.2] into the
fastening rail [14.3].
Notice!
The recesses [14.7]
in the cover must point in the
direction of the mounting rail
[14.3].
Note:
The cover [14.2] must
be aligned to the fastening rail
[14.3] -> the left and right over-
laps (k) must be identical!
Adjusting the light head
See Fig. 15.
If required, the angle between light
head and wall may be changed.
To this end, remove the chassis and
the cover again.
f) Screw one screw each [15.5]
into the fastening rail 30 mm
to the left and to the right,
respectively, of the edge of the
fastening rail.
g) Unscrew the screws [15.5] on
both sides until the cover [14.2]
has the required position.
h) Check position with a spirit level
and correct it again, if necessary.
