33
Control
ENG
5.5 Operating mode "Combined
operation WHITE+RGB"
In the operating mode "Combined opera-
tion WHITE+RGB", one or several appropri-
ate white luminaires and a final luminaire
with adjustable light colour can be operated
and controlled with one single connection
cable. The white luminaires can be oper-
ated in different dimming levels and the
RGB luminaire with different light colours
at the same time.
Appropriate luminaires for the operating
mode "Combined operation WHITE+RGB"
are identified by the letter combination
MST
(for luminaires with white light colour)
and
RGB
(for luminaires which can adopt
different light colours) in the model number.
NOTES:
For this combined operation, all lumi-
naires must be connected to one con-
nection cable in the operating mode
"Combined operation WHITE+RGB".
In luminaires with through-wiring con-
nected in series, the total current con-
sumption must not exceed
3 A
. The
data given on the rating plate of the
luminaire apply.
Possible dimming levels and light col-
ours in the operating mode "Combined
operation WHITE+RGB"
Dimming level
Signal
Bit: 0
1
2
Pin: 2
4
5
0 %
0
1
0
40%
1
1
0
70%
1
0
0
100%
0
0
0
Tab. 7: Adjustable dimming levels for the oper-
ating mode "Combined operation WHITE+RGB"
for the luminaire variants MST.
Light colour
Signal
Bit: 0
1
2
Pin: 2
4
5
Off
0
0
1
Red
1
0
1
Yellow
0
1
1
Green
1
1
1
Tab. 8: Adjustable light colours in the operating
mode "Combined operation WHITE+RGB" for the
luminaire variants RGB.
