background image

Thank you for purchasing Wakespeed Offshore’s Model WS100/12 Multi-
Stage Voltage Regulator. Designed by Michael Frost, one of the pioneers of 
smart, multi-stage battery charging systems, the Wakespeed WS100/12 
voltage regulator provides optimal care for your batteries, when used in 
conjunction with a P-type, externally regulated alternator.

The WS100/12 was designed specifically to provide the user with an ex-
tremely simple interface — only two adjustments are required to deliver 
tailored  charging  to  your  batteries.  A  convenient  five-position  rotating 
switch enables the user to select one of five programs based on battery 
type:  standard  flooded/gel,  standard  AGM,  Carbon  Foam,  deep  cycle 
flooded and high-density AGM/TPPL.

In addition to the selectable programs for battery type, the WS100/12 
provides the ability to adjust the maximum regulator field output, making 
it possible to reduce alternator horsepower load to the engine and belt. 
Four  settings  are  available:  100%  (no  field  reduction),  90%,  75%  and 
50% field output.

The WS100/12 can be used alone, or in conjunction with optional WS-
100-ATS and WS-100-BTS alternator and battery temperature sensors. 
With the temperature sensors installed, the WS100/12 can monitor and 
respond to changes in ambient battery temperatures and reduce charging 
output if the alternator temperature exceeds safe operating temperatures.

WS100/12 Product Manual

Page 1

Summary of Contents for WS100/12













Reviews: