background image

Thank you for buying a 

Waikato

 Milking Systems Rotary Loopline 

milking system.  

You have purchased one of New Zealand’s finest milking machines which will give you 
years of good service and will be an asset to your farm. 
 
This guide for service and cleaning will help you get the most out of your new 
investment. 
 
Your 

Waikato

 Rotary Loopline 

has been constructed using the best components made 

from the best materials.  Waikato Milking Systems have combined modern technology 
with good old fashioned durability and reliability to create a milking system which needs 
very little service.  With a normal scheduled maintenance program you can expect many 
years of trouble free operation. 
 
 Your 

Waikato

 Rotary Loopline 

is very easy to clean.  Its cleaning system uses water 

more effectively and efficiently than a standard cleaning system. 
 
All Waikato Milking Systems proprietary components on your milking machine are 
covered by a 12 month warranty, or you may have accepted an extended warranty 
program which looks after your Waikato Milking System for two years.  (Special 
conditions apply).  The normal manufacturers’ warranties apply to all ancillary 
components. 
 
To ensure you experience trouble free operation of your 

Waikato

 Rotary Loopline 

please follow these simple instructions. 
 
If at any time you need technical assistance please do not hesitate to contact the 
Waikato Milking Systems dealer from whom you purchased your 

Waikato

 Rotary 

Loopline

, or telephone our office directly.  The telephone numbers are listed below. 

 
We wish you many years of happy milk harvesting. 
 
 
 
 
 
 
 
 

 

  WAIKATO MILKING SYSTEMS NZ LIMITED 

 

Telephone: 07-849 

8755 

Fax: 07-849 

0785 

E-mail: 

[email protected]

 

www.waikatomilking.co.nz 
 
 
 
 
 

 
© Waikato Milking Systems NZ Limited 2002 

All rights reserved.  No part of this Manual may be reproduced in any form or by any means without permission in writing from 
Waikato Milking Systems NZ Limited.

 

2

Summary of Contents for Rotary Loopline










Reviews: