6
7. Turn the dial to the “0/OFF” position when you have
finished. Wait for the blender to completely stop.
Unplug the appliance before removing the lid or the
jug.
8. Always ensure the appliance is unplugged after use.
Note: It is recommended to cut the meat, vegetables or
other food into smaller pieces before putting them in the
jug. Large quantities of food should be processed in small
batches, do not overload.
Do not operate the appliance continuously for more than 1
minute. Always allow the appliance to cool down to room
temperature before continuing.
ALWAYS COOL HOT LIQUIDS BEFORE BLENDING.
NOTE: IF BLENDING WARM LIQUIDS REMOVE
THE MEASURING CAP AND START AT LOW SPEED
INCREASING TO HIGH SPEED IF REQUIRED. THE
PULSE SETTING IS NOT RECOMMENDED FOR WARM
LIQUIDS. DO NOT BLEND WARM LIQUIDS OVER
THE 1L LEVEL, AND ALWAYS TAKE CARE TO AVOID
CONTACT WITH ANY STEAM OR LIQUIDS.
USING THE GRINDING ATTACHMENT
1. Make sure the unit is unplugged and turned off before
installation of the grinder attachment.
2. The grinder can be used for nuts, dried fruit, bread
crumbs etc.
3. Turn grinder upside down and carefully unscrew the
blade housing. Carefully remove the blade housing.
4. Fill the grinder with desired ingredients. Do not fill
more than half full.
5. Screw the blade housing tightly on to the bowl.
NOTE: If it is not tightly screwed together the Motor will
not work due to a safety mechanism.
6. Turn the grinder the right way up and lock into place on
the motor unit by turning clock wise.
7. Plug the appliance in and select desired speed setting.
8. When the ingredients have been grounded/chopped to
the desired consistency, unplug the appliance, and
remove the grinding unit from the appliance
.
W a h l k i t c h e n i n n o v a t i o n s
Innovative products since 1919
