11
W a h l k i t c h e n i n n o v a t i o n s
Innovative products since 1919
WIRING
WARNING: If the supply cord is damaged it must be
replaced by the manufacturers service agent or a
similarly qualified person in order to avoid a hazard.
The wires in the mains lead of this Table Blender are
coloured in accordance to the following code:
Blue Neutral (N)
Brown live (L)
This appliance is fitted with a 3 pin plug which has a
13amp fuse fitted.
If the plug supplied is not suitable for your socket or
becomes damaged, it should be cut off and disposed
of, and a suitable plug fitted as detailed below.
As the colours of the wires in the mains lead of this
Table Blender with Grinder may not correspond with
the colour markings identifying the terminals in your
plug, proceed as follows.
The wire which is coloured BLUE must be connected
to the terminal in the plug which is marked with the
letter ‘N’ or coloured BLACK or BLUE.
The wire which is coloured BROWN must be
connected to the terminal in the plug which is marked
with the letter ‘L’ or coloured RED or BROWN.
DO NOT connect either wire to the terminal in the
plug which is marked with the letter ‘E’ or has the Earth
symbol, or coloured GREEN or GREEN/YELLOW.
