5
INSTALLATION
1. Remove all packaging and clean the jug,
measuring cup and lid thoroughly before using for
the first time. Only clean the main unit with a damp
cloth. Never immerse the unit in water or place
under running water. See cleaning & storage
section page 7 & 8 for full cleaning instructions.
The blender should be placed on flat surface
before operation. Note: The blade is very sharp.
Wash with care and never touch the blade with
your fingers.
2. Do not plug in the appliance before assembling.
3. Place the appliance on a flat surface.
4. Place the jug on to the motor unit and lock into
place by turning clockwise. Lining up the markings
on the jug and mainbody.
5. Put the lid on top of the jug and push it down.
Insert the measuring cup into the cover and turn
until it locks into place.
6. Make sure the appliance is turned off before
plugging in.
W a h l k i t c h e n i n n o v a t i o n s
Innovative products since 1919
HOW TO USE
1. Before plugging in ensure that the mains voltage
matches that shown on the rating label.
2. This unit has a safety design, it will not work if the jug
is not installed onto the main body properly.
3. Turn the control dial to position 0 in order to make sure
the unit is turned off.
4. Place ingredients into the jug, do not exceed the
maximum 1.5L capacity.
DO NOT OPERATE WITH OUT ANY INGREDIENTS.
5. Put the lid on top of the jug ensuring it is fitted
correctly.
6. Turn the control dial clockwise to your desired speed
as you need, or use the pulse function by turning the
dial anti-clockwise.
IMPORTANT NOTE: Do not open the lid while the
blender is working.
CONTROL SETTINGS
P - Pulse. The pulse setting will operate at the highest
speed, and will only operate when you are holding the
switch, as soon as you release the switch the
appliance will stop. This is suitable for ice and for when
you only want to roughly blend ingredients and you
require control so that you don’t end up with a really
fine mixture.
1 - Low Speed. Will blend continuously on Low speed until
you return the switch to the off position.
2 - High Speed. Will blend continuously on High speed
until you return the switch to the off position.
0 - Off. Will turn off the unit.
