16
Recharger:
7.5V @ 120mA from 11Ovac line.
Line Operation:
Continuously operable from recharger through
internal batteries.
Effects of High AC
No damage or display effect at 120 vac.No damage at
Voltage on Probe:
500 vac
Size and Weight:
3” wide x 6” long x 11/2” high. 12 oz.
(7.5cm x 15cm x 3.7 cm; 340 gm.)
Mode of Operation:
A) Normal
B) Peak-Hold: holds last peak reading. Digitally implemented.
C)Off.
Linearization:
Microcomputer corrected over the entire range.
Based on IPT-S68 curves to 0.5°F (.05°F for Type T).
Peak Hold:
Microcomputer-calculated switch to “P” to activate
(holds and displays highest reading).
Probe Connection:
Standard miniature thermocouple connector
(female) compensated.
Noise Rejection:
Greater than 40DB at 60Hz increasing at 20DB per decade.
Spurious noise is attenuated by internal 16Hz filter.
Warm-up:
Instantaneous.
Cold Junction
Internal at female thermocouple
Compensation:
connector, automatic.
Summary of Contents for 2500MX
