RECEIVING INSPECTION
Check your new Wahl Portable Thermocouple Heat-Prober Thermometer upon
Receiving to assure that:
1. It has not been physically damaged in transit.
2. All parts are included.
Then, plug in the probe at top and turn it on to see that it reads room temperature.
If a fault is determined, take the following steps:
1. Notify the Wahl factory of the difficulty. Give model number and description.
Wahl will authorize return, and notify our service department to receive the
unit.
2. Return the instrument in its shipping container to the factory, freight pre-
paid. Repairs will be made under warranty or at regular service cost.
3. Prepare a “Repair Information Form” as shown in Section 12.0 and return
with the instrument. This is very important. We need the information to
diagnose the problem. If there is no information returned with the unit, it
will slow up the repair process.
ii
Summary of Contents for 2500MX
