WAGO TP298, Manual

Page: 37 / 42

37
TP298
First, you click on the tab "Printer" and select the corresponding driver by clicking on the button
Apply . You switch then to the area Output devices and select the desired output device. By clicking
on the button Close you leave the output devices dialog.
8.3.1.
Selecting the inscription material for TT printer or plotter
Subsequent to the selection of the printer driver or the output device respectively, a dialog box opens
with all inscription materials available for the thermal transfer printer or plotter.
The WAGO marking strip 11 mm has been designed for the inscription of the new terminal block
series TOPJOB
©
S. The WAGO marking strip 7.5 mm is suitable for the series 870, 270, 869, as well
as for the motor terminal blocks 281-530 to 281-532.
8.3.2.
Creating a grid for WAGO marking strips 7.5 and 11 mm
By right clicking on the strip and selection of the menu item "Divide strip", the following dialog box
appears:
The width of the individual terminal blocks (e.g. 5.2 mm for a TOPJOB
©
S terminal block of the Series
2002), and their quantity can be entered. The remaining residual length is calculated automatically,
in order to generate a strip with a maximum length of 1m, with different grid divisions.