WAGO TP298, Manual

Page: 31 / 42

31
TP298
8. WAGO ProServe software
The following section introduces two other components of the ProServe CD: the programs
smartDESIGNER and smartMARKING.
Both programs are very well suited to quickly and easily print marking strips (Item no. 2009-110)
and WMB Inline (Item no. 2009-115) on your new printer.
8.1.
Installation of ProServe software
Start the installation routine from the ProServe CD (see also section 6.1).
Select "Installation" and click on the corresponding icons to initialize the complete installation. Follow
the instructions as given during installation.
Other information to setup (e.g. the uninstallation of an older software version) can be found in the
Quickstart brochure in PDF format on the ProServe CD in the directory
\Manuals\SmartDesigner_and_productLocator
.
8.2.
Design and inscription with smartDesigner
8.2.1.
Creating a new project
•
Creating a new project group in menu item Project – "Insert project group" . A project group is a
common folder for e.g. all projects of a customer, a control cabinet, etc.
•
Right click on the project group and select the item Insert mounting rail . The mounting rail dialog
opens where other settings can be made.