WAGO I/O System Compact
Appendix 175
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
Table 107: WBM “Configuration of SNMP v3” Page – “Actually configured v3 Users” Group
Parameters
Meaning
Authentication Type
Specify the authentication type for the SNMP v3
packets.
Possible values:
- Use no authentication (“None”)
- Message Digest 5 (“MD5”)
- Secure Hash Algorithm (“SHA”)
Authentication Key (min. 8
char.)
Specify the authentication key. The key must be
min. 8 and max. 32 characters long and contain
lower case letters (a … z), upper case letters
(A … Z), numbers (0 … 9), special characters !()*~'.-
_ but no spaces.
Privacy
Specify the encryption algorithm for the SNMP
message.
Possible values:
- No encryption (“None”)
- Data Encryption Standard (“DES”)
- Advanced Encryption Standard (“AES”)
Privacy Key (min. 8 char.)
Enter the key for encryption of the SNMP message.
If nothing is specified here, the “authentication key”
is automatically used. The key must be min. 8 and
max. 32 characters long and contain lower case
letters (a … z), upper case letters (A … Z), numbers
(0 … 9), special characters !()*~'.-_ but no spaces.
Notification Receiver IP
Specify an IP address for a trap receiver for v3
traps. If no v3 traps are to be sent for this user, this
field remains blank.
Click the respective
[Delete]
button to delete an existing user.
Click
[Add]
to add a new user.
The changes only take effect after the controller restarts. For this purpose, use
the WBM reboot function. Do not shut down the controller too early!
