WAGO I/O System Compact
Appendix 153
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
15.1.1.2.9 “Firmware Restore” Page
The settings for restoring the controller data are shown on the “Firmware
Restore” page.
“Firmware Restore” Group
Table 82: WBM “Firmware Restore” Page – “Firmware Restore” Group
Parameter
Explanation
Source
Select the data source for the restore here.
Memory Card
The data is read from the memory
card.
This selection is only enabled if a
memory card is inserted and the
device has not been booted from
the memory card.
Network
The data is uploaded from the PC
and restored.
Boot Device
The storage medium from which the device was
booted is displayed here.
PLC runtime project
Enter the name of the backup file for the CODESYS
project here.
The input field only appears if the network is
selected as the data source.
Settings
Enter the name of the backup file for the settings
here.
The input field only appears if the network is
selected as the data source.
System
Enter the name of the backup file for the system
data here.
The input field only appears if the network is
selected as the data source.
Decryption
If you have backed up the data in encrypted form,
select this checkbox.
Decryption passphrase
Enter the encryption password here.
This input field only appears if the “Decryption”
checkbox is selected.
Note the firmware version!
Restoring the controller operating system (“System” selection) is only permissible
and possible if the firmware versions at the backup and restore times are
identical.
If necessary, skip restoring the controller operating system, or match the
firmware version of the controller to the firmware version of the backup time
beforehand.
