EPSITRON® COMPACT Power
Device Description
33
787-1202 / -1212 / -1216 / -1226 EPSITRON® COMPACT Power
Manual
Version 1.0.0
Table 19: EMC – Emission of Interference
Standard
Test value
1)
Emission – enclosure
• EN 61004
-3 Class B
40 dB(µV/m), QP, 30 MHz … 230 MHz
47 dB(µV/m), QP, 230 MHz … 1 GHz
Conducted emission – line connection AC voltage
• EN 61
204-3 Class B
• EN 55022
Class B
66 dBµV … 56 dBµV, QP, 150 kHz … 500 kHz
56 dBµV … 46 dBµV, AV, 150 kHz … 500 kHz
56 dBµV, QP, 500 kHz … 5 MHz
46 dBµV, AV, 500 kHz … 5 MHz
60 dBµV, QP, 5 MHz … 30 MHz
50 dBµV, AV, 5 MHz … 30 MHz
• EN 61000
-6-4 + A1
• EN 55011 + A1
Class A
79 dBµV, QP, 150 kHz … 500 kHz
66 dBµV, AV, 150 kHz … 500 kHz
73 dBµV, QP, 500 kHz … 30 MHz
60 dBµV, AV, 500 kHz … 30 MHz
1)
QP = Quasi Peak Detector; AV = Average Detector
Pos: 42 /Serie 787 (
EPSITRON
)/Ger ätebeschrei bung/N or men und Richtli nien/N ormen und Z ul assungen 787- 12xx - Sonstige Hinweise @ 18\mod_1393402802451_21.docx @ 146485 @ 2 @ 1
3.9
Other Information on Standards and Directives
Observe the following:
•
Perform installation according to the local conditions, applicable regulations
(e.g., VDE 0100), national accident prevention specifications (e.g., UVV-
VBG4 or BGV A2) and accepted technical regulations.
•
This electrical equipment is intended for installation in electrical systems or
machines and fulfills the requirements of the low-voltage directive.
When installing in machines, the following also applies:
•
When installing in machines, normal operation must not commence until it
is determined the machine complies with the requirements of machinery
directive EN 60204.
•
Commencing normal operation is only allowed under compliance of the
EMC directive.
•
The manufacturer of the system or machine is responsible for ensuring
compliance with the limit values required by EMC legislation.
Pos: 43 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
