Appendix 49
758-919 Wireless Access Point
Manual
Version 1.0.0
6
Appendix
6.1
Configuration Examples
6.1.1
Ethernet Bridge via WLAN or Bluetooth
®
(Easy Config)
Figure 23: ETHERNET Bridge
This example describes how to connect two ETHERNET network segments via
WLAN or
Bluetooth
®
using Easy Config.
1.
In the web interface of unit 1, activate
Easy Config Mode 4
. This unit will
now be discoverable and open for automatic configuration.
Figure 24: Easy Config Mode 4
2.
In the web interface of unit 2, activate
Easy Config Mode 5
for WLAN or 6
for
Bluetooth
®
. Unit 2 will now discover and configure unit 1 as a client and
configure itself as an access point.
Figure 25: Easy Config Mode 5
Unit 1 will be assigned the first free IP address in the same Ethernet subnet as
unit 2.
Adding More Devices
Up to 6 additional clients can be added by repeating the procedure. Each new
client will be assigned the next free IP address in the current subnet.
