14 Important Notes
758-919 Wireless Access Point
Manual
Version 1.0.0
Replace defective or damaged devices!
Replace defective or damaged device (e.g., in the event of deformed contacts),
since the long-term functionality of fieldbus station involved can no longer be
ensured.
Protect the components against materials having seeping and insulating
properties!
The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for
handling devices/modules.
Cleaning only with permitted materials!
Clean soiled contacts using oil-free compressed air or with ethyl alcohol and
leather cloths.
Avoid electrostatic discharge!
The devices are equipped with electronic components that you may destroy by
electrostatic discharge when you touch. Pay attention while handling the devices
to good grounding of the environment (persons, job and packing).
Functional earth
This product is recommended for use in both industrial and domestic
environments. For industrial environments it is mandatory to use the functional
earth connection to comply with immunity requirements. For domestic
environments the functional earth must be omitted if a shielded Ethernet cable is
used, in order to meet emission requirements.
Device uses radio waves!
Never use the device in areas where operation of radio equipment is prohibited.
