38
Mounting
753-646 KNX/EIB/TP1 Module
Manual
Version 1.2.0
6.3.2
Plug Removal
1.
Remove the plug from the I/O module by pulling the orange pull tab on the
plug toward the top of the I/O module.
Figure 18: Pulling the Pull Tab
The plug detaches from the I/O module.
Figure 19: Removing the Plug Without Tools
2.
Alternatively, you can also use a standard screwdriver at the position
shown (in the figure below) to remove the plug.
Figure 20: Removing the Plug Using a Screwdriver
