74 Commissioning
WAGO-I/O-SYSTEM 750
750-564 4AO U/I
Manual
Version 1.0.0
7.3
Configuration and Parameterization via GSD File
The I/O module can also be parameterized via PROFIBUS and PROFINET
device description (GSD file).
Behavior after Overwriting with
WAGO-I/O-
CHECK
!
If
WAGO-I/O-
CHECK
is used to overwrite a parameterization made with the
GSD file, the I/O module operates with the
WAGO-I/O-
CHECK
settings until the
750-333 and 750-833 Fieldbus Couplers/Controllers are restarted.
After restart, the I/O module is re-parameterized via PROFIBUS using the GSD
settings.
Pos: 90 /Serie 750 (WAGO-I/O-SYSTEM)/Anhang/Konfigurieren und Parametrieren per GSD bei PROFIBUS DP und PROFINET IO 750-0652 @ 15\mod_1366809580641_6.docx @ 117978 @ 3443444 @ 1
7.3.1
4AO U/I Configuration
7.3.1.1 PROFIBUS DP Fieldbus Couplers/Controllers 750-333(/0xx-000),
750-833(/0xx-000)
If the aforementioned PROFIBUS DP fieldbus devices are used, the process
image size is configured by selecting the corresponding GSD entry.
Table 55: PROFIBUS DP Configuration
GSD Entry
PA length
[Byte]
Data type
Inst.
Module
Submodule
I
O
750-564 4AO U/I/16Bit
n/a
n/a
8
UINT16
4
750-564 4AO U/I/15Bit
INT16
750-564 4AO U/I/16Bit RA
12
12
{UINT8, UINT16}
750-564 4AO U/I/15Bit RA
{UINT8, INT16}
PFC 750-564 4AO U/I
*)
n/a
n/a
n/a
n/a
*)
Only available with 750-833(/0xx-000)
7.3.1.2 PROFINET IO Fieldbus Couplers 750-375(/025-000), 750-377(/025-000)
If the aforementioned PROFINET IO fieldbus couplers are used, the process
image size is configured by selecting the corresponding GSD entry.
