WAGO I/O System 750
Mounting 31
750-506 2DO 24V DC 0.5A/ diagnostics
Manual
Version 1.2.1
Public
Figure 7: Inserting I/O Module (Example)
2.
Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.
Figure 8: Snap the I/O Module into Place (Example)
3.
Check that the I/O module is seated securely on the carrier rail and in the
assembly. The I/O module must not be inserted crooked or askew.
Once the I/O module has snapped into place, the electrical connections for the
data contacts and power contacts (if any) to the head station or to the preceding
and, if applicable, following I/O module are established.
Pos: 66.12 /Serie 750 ( WAGO I/O SYST EM)/Monti eren/D emonti eren/I/O-M odul entfernen (neutrales 3D) @ 35\mod_1561382848176_21.docx @ 548874 @ 3 @ 1
5.2.2
Removing the I/O Module
1.
Remove the I/O module from the assembly by pulling the release tab.
