Appendix 97
750-458 8AI; TC; Adjust
Manual
Version 1.3.0
Table 54: Specific module / channel parameters for 750-458
GSD File
WAGO-I/O-
CHECK
Description Value
Selection box Value
Type J [DIN EN 60584-1]
Type J [DIN EN 60584-1]
Type K [DIN EN 60584-1]
*)
Type K [DIN EN 60584-1]
*)
Type S [DIN EN 60584-1]
Type S [DIN EN 60584-1]
Type R [DIN EN 60584-1]
Type R [DIN EN 60584-1]
Type B [DIN EN 60584-1]
Type B [DIN EN 60584-1]
Type T [DIN EN 60584-1]
Type T [DIN EN 60584-1]
Type C [DIN 43710]
Type C [DIN 43710]
±30 mV
±30 mV
± 60 mV
± 60 mV
±120 mV
±120 mV
±240 mV
±240 mV
Measuring
channel
Channel x
(x = 0 … 7)
deactivated
Measuring
channel
Checkbox
deactivated
activated
*)
activated
*)
Cold-junction
compensation
Channel x
(x = 0 … 7)
deactivated
Cold-junction
compensation
Checkbox
deactivated
activated
*)
activated
*)
*)
Default setting
10.1.2.2 PROFIBUS DP Fieldbus Coupler
750-333(/0xx-000), 750-833(/0xx-000)
The aforementioned fieldbus couplers allow module-specific parameterization of
behavior at diagnosis.
Table 55: General module / channel parameters
Parameter
Value
Explanation
Diagnosis
Channel x (x =
0 … 7)
0 (disabled)
*)
The fieldbus coupler signals a diagnosis if the
I/O module reports the events:
•
Measuring range overflow
•
Measuring range underflow
•
Short circuit
•
Line break
Diagnostics reported by the I/O module do not
lead to the signaling of a diagnosis by the
fieldbus coupler.
1 (enabled)
Diagnostics reported by the I/O module lead to
the signaling of a diagnosis by the fieldbus
coupler.
*)
Default setting
