manualshive.com logo in svg

WAGO 750-1504, Manual

Share
Download
WAGO 750-1504 Manual Download Page 6

6 

Notes about this Documentation 

WAGO-I/O-SYSTEM 750 

 

 

750-1504 16DO 24V DC 0.5A 

 

s: 11.3 /Alle Serien (Allgemeine Module)/Hinweise zur Dokumentation/Symbole @ 3\mod_1217394197593_21.doc @ 21010 @ 2 @ 1 

Po

 

1.3 

Symbols 

 

 

 

Personal Injury! 

Indicates a high-risk, imminently hazardous situation which, if not avoided, will 
result in death or serious injury. 

 

 

 

Personal Injury Caused by Electric Current! 

Indicates a high-risk, imminently hazardous situation which, if not avoided, will 
result in death or serious injury. 

 

 

 

Personal Injury! 

Indicates a moderate-risk, potentially hazardous situation which, if not avoided, 
could result in death or serious injury. 

 

 

 

Personal Injury! 

Indicates a low-risk, potentially hazardous situation which, if not avoided, may 
result in minor or moderate injury. 

 

 

 

Damage to Property! 

Indicates a potentially hazardous situation which, if not avoided, may result in 
damage to property. 

 

 

 

Damage to Property Caused by Electrostatic Discharge (ESD)! 

Indicates a potentially hazardous situation which, if not avoided, may result in 
damage to property. 

 

 

 

Important Note! 

Indicates a potential malfunction which, if not avoided, however, will not result in 
damage to property. 

 

Manual 

 

Version 1.0.1  

Summary of Contents for 750-1504





































Reviews:

No comments

Brands by name

Popular brands

Load more brands