manualshive.com logo in svg

WAGO 750-1504, Manual

Share
Download
WAGO 750-1504 Manual Download Page 27

WAGO-I/O-SYSTEM 750 

Connect Devices 

27 

750-1504 16DO 24V DC 0.5A 

 

 

 

s: 65 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Geräte anschließen - Überschrift 1 @ 3\mod_1234172889468_21.doc @ 27460 @ 1 @ 1 

Po

 

5 Connect 

Devices 

Po

 

s: 66 /Serie 750 (WAGO-I/O-SYSTEM)/Anschließen/Leiter an CAGE CLAMP S anschließen - Überschrift 2 und Text @ 6\mod_1258964749000_21.doc @ 44640 @ 2 @ 1 

5.1 

Connecting a conductor to the CAGE CLAMP

® 

S 

The WAGO CAGE CLAMP

® 

S connection is appropriate for solid, stranded and 

finely stranded conductors. 

 

 

Note

 

Only connect one conductor to each CAGE CLAMP

®

 S connection! 

Only one conductor may be connected to each CAGE CLAMP

®

 S connection.  

Do not connect more than one conductor at one single connection! 

If more than one conductor must be routed to one connection, these must be 
connected in an up-circuit wiring assembly, for example using WAGO feed-
through terminals. 

Terminate both solid and stranded or ferruled conductors by simply pushing them 
in - no tool required. For all other types of conductors, CAGE CLAMP

®

 S must 

be opened for connection with an operating tool with a 2.5 mm blade (order no. 
210-719). 

1. 

To open the CAGE CLAMP

®

 S insert the actuating tool into the opening 

above the connection. 

2. 

Insert the conductor into the corresponding connection opening. 

3. 

To close the CAGE CLAMP

®

 S simply remove the tool - the conductor is 

then clamped firmly in place. 

  

Figure 10: Connecting a conductor to a CAGE CLAMP

® 

S 

 

Pos: 67 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @  @ 1 

 

Manual 

 

Version 1.0.1  

 

Summary of Contents for 750-1504





































Reviews:

No comments

Brands by name

Popular brands

Load more brands