manualshive.com logo in svg

WAGO 750-1504, Manual

Share
Download
WAGO 750-1504 Manual Download Page 14

14 

Device Description 

WAGO-I/O-SYSTEM 750 

 

 

750-1504 16DO 24V DC 0.5A 

 

 

 

Do not exceed maximum current via power contacts! 

The maximum current to flow through the power contacts is 10 A.  
Greater currents can damage the power contacts.  
When configuring the system, ensure that this current is not exceeded. If 
exceeded, an additional potential feed module must be used. 

 

s: 17.13 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Sicherheitshinweise/Hinweis/Hinweis: Potentialeinspeiseklemme für Erde einsetzen! @ 3\mod_1226499037468_21.doc @ 25023 @  @ 1 

Po

 

 

 

 

 

Use potential feed module for Ground (earth)! 

The I/O module has no power contacts for PE intake and transfer. Use a potential 
feed module when a PE feed is needed for the subsequent I/O modules. 

 

s: 17.14 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Beschreibung/Versorgung/Galvanische Trennung Feld/Syste

Po

 

m @ 3\mod_1233756478750_21.doc @ 27102 @  @ 1 

The field level and the system level are electrically isolated from one another. 

Po

 

s: 17.15 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Beschreibung/Versorgung/Anordnung unter Berücksichtigung der Leistungskontakte beliebig @ 3\mod_1233756233468_21.doc @ 27099 @  @ 1 

With consideration of the power jumper contacts, the individual modules can be 
arranged in any combination when configuring the fieldbus node. An arrangement 
in groups within the group of potentials is not necessary. 

Po

 

s: 17.16 /Serie 750 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Beschreibung/Einsatzbereich/Einsatzbereich 750-xxxx alle Koppler/Controller ohne Einschränkung @ 3\mod_1232541691906_21.doc @ 26522 @  @ 1 

The I/O module 750-1504 can be used with all fieldbus couplers/controllers of the 
WAGO-I/O-SYSTEM 750. 

Po

 

s: 18 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @  @ 1 

 

Manual 

 

Version 1.0.1  

Summary of Contents for 750-1504





































Reviews:

No comments

Brands by name

Popular brands

Load more brands