WAGO 2787-2154 Product Manual Download

Page: 71 / 76

2787-2154

Appendix

Product manual | Version: 1.0.2

Power Supply Pro 2

Accessories – Spare Parts

Table 70: Accessories – Spare Parts

Description

Item Number

Female connector as spare part, input

0721-0203/0000-0004/0000-
9540

Female connector as spare part, output

0721-0105/0000-0015/0000-
9504

Female connector as spare part, signal

0721-0104/K000-0001

13.3 Protected Rights

• Adobe

and Acrobat

are registered trademarks of Adobe Systems Inc.

• Android

is a trademark of Google LLC.

• Apple, the Apple logo, iPhone, iPad and iPod touch are registered trademarks of Apple

Inc. registered in the USA and other countries. “App Store” is a service mark of Apple
Inc.

• AS-Interface

is a registered trademark of the AS-International Association e.V.

• BACnet

is a registered trademark of the American Society of Heating, Refrigerating

and Air Conditioning Engineers, Inc. (ASHRAE).

•

Bluetooth

is a registered trademark of Bluetooth SIG, Inc.

• CiA

and CANopen

are registered trademarks of CAN in AUTOMATION – Interna-

tional Users and Manufacturers Group e.V.

• CODESYS is a registered trademark of CODESYS Development GmbH.
• DALI is a registered trademark of the Digital Illumination Interface Alliance (DiiA).
• EtherCAT

is a registered trademark and patented technology licensed by Beckhoff

Automation GmbH, Germany.

• ETHERNET/IP™ is a registered trademark of the Open DeviceNet Vendor Association,

Inc (ODVA).

• EnOcean

is a registered trademark of EnOcean GmbH.

• Google Play

is a registered trademark of Google Inc.

• IO-Link is a registered trademark of PROFIBUS Nutzerorganisation e.V.
• KNX

is a registered trademark of the KNX Association cvba.

• Linux

is a registered trademark of Linus Torvalds.

• LON

is a registered trademark of the Echelon Corporation.

• Modbus

is a registered trademark of Schneider Electric, licensed for Modbus Organi-

zation, Inc.

• OPC UA is a registered trademark of the OPC Foundation.
• PROFIBUS

is a registered trademark of the PROFIBUS Nutzerorganisation e.V.

(PNO).

• PROFINET

is a registered trademark of the PROFIBUS Nutzerorganisation e.V.

(PNO).

• QR Code is a registered trademark of DENSO WAVE INCORPORATED.
• Subversion

is a trademark of the Apache Software Foundation.

• Windows

is a registered trademark of Microsoft Corporation.

Summary of Contents for 2787-2154













































































Search results

Summary of Contents for 2787-2154

Reviews:

Related manuals for 2787-2154

Brands by name

Popular brands

WAGO 2787-2154, Product Manual

Search results

Summary of Contents for 2787-2154

Reviews:

Related manuals for 2787-2154

Brands by name

Popular brands