background image

26

W 200

GB

Technical Data

Sound pressure level*:

72 dB (A); Uncertainty K = 4 dB

Sound pressure output*:

85 dB (A); Uncertainty K = 4 dB

Oscillation level*:

< 2.5 m/s²; Uncertainty K = 1.5 m/s²

Air hose length:

1.8 m

Weight:

approx. 2.0 kg

* Measured in accordance with EN 60745-1

Information about the oscillation level

The specified oscillation level has been measured according to a standard test 

procedure and can be used to compare against electric tools. 

 

The oscillation level is also for determining an initial assessment of the vibrational strain.

Attention! 

The vibration emission value can differ from the specified value when the 

electric tool is actually in use, depending on how the electric tool is being used. It is 

necessary to specify safety measures to protect the operating personnel. These measures 

are based on an estimated shutdown during the actual conditions of use (all parts of the 

operating cycle are taken into consideration here, for example periods when the electric 

tool is switched off, and, when it is switched on but running without any load).

19. Environmental protection

The device and all accessories and packaging have to be recycled in an 

environmentally friendly manner. Do not dispose of the appliance with 

household waste. Support environmental protection by taking the appliance 

to a local collection point or obtain information from a specialist retailer. 

Leftover paint and solvents may not be emptied into drains, the sewage system 

or disposed of as household rubbish. It has to be disposed of separately as 

special waste. Please pay special attention to the instructions on the product 

packaging.

20. Important Note regarding Product Liability!

According to an EU directive, the manufacturer is only liable without limitation for faults 

in the product if all parts come from the manufacturer or have been approved by the 

manufacturer and have been mounted to the device and are operated properly. If third-

party accessories or spare parts are used, the manufacturer is exonerated wholly or partly 

from his/her liability if use of the third-party accessories or spare parts have caused a 

defect in the product.

Summary of Contents for W200























Reviews: