WAGNER U580.00, Translation Of The Original Operating Manual, Page: 21 / 52

21
Unica 4-270
.
OPERATING MANUAL
EDITION 04 /2007 PART NO. ZZB006ENG
5
STARTING UP AND OPERATING
5.1
INSTALLATION AND CONNECTION
The Unica 4-270 diaphragm pum can be wall-mounted or fl oor-mounted.
For a diagram of the tipical installations, see Paragraph 5.1.6. The diagram does not
represent the most suitable solution in all situations and is given as mere example. Please
apply to a Wagner authorised engineer for further information about the best mounting
solution for each user’s special needs.
To make pump operation and maintenance easier install the device so that the
pneumatic supply inlet and the pneumatic supply/suction fi ttings of the pump are easily
accessible.
Install the pump in a horizontal position.
For support to integrate the pump in a pre-existing plant or for a customised location,
please apply to a Wagner authorised engineer.
Always use original Wagner spare parts.
5.1.1
PUMP WALL-INSTALLATION
The Unica 4-270 pump installation kit for wall-mounting can be supplied on request.I
Part number:
Wall mounting kit: T6151.00
For information regarding the kit contents and assembling, please see the relevant para-
graph in chapter 7 - Accessories.
5.1.2
PUMP INSTALLATION ON GROUND FRAME
The Unica 4-270 pump installation kit on a ground frame can be supplied on request.
Part number:
Ground frame kit: T6148.00
For information regarding the kit contents and assembling, please see the relevant para-
graph in chapter 7 - Accessories.
C_41_SIHI_0012_GB
WARNING
Inclined surface!
Risk of accidents if the unit rolls away/falls.
œ
Place the frame with the pump horizontally.
œ
Lock the frame.