English
4
What’s in
the box?*
Start
*Certain parts of the sprayer will not be
assembled out of the box. Be sure to read
Assembly instructions, page 6.
Notice:
Refer to the engine manufacturer’s
instruction manual for complete engine
information. Heed all cautions and
warnings.
Note: The engine on the sprayer will come
filled with oil. However, it is still a good idea
to check it prior to startup. The engine has
sufficient oil when you can see it just below the
opening in the oil reservoir when the oil cap (a)
is removed.
(a)
GS-07 Spray Gun Assembly
Sprayer Assembly
VersaTip™ Spray Tip Assembly
Spray Hose Assembly (50 ft)
Sureflo™ valve
Pail bracket
Suction tube
Material
return tube
Inlet filter
Spray hose port
(reverse side)
DirectLink™ pressure
control knob
AutoOiler™ ca
p
Hose wrap
Engine
Pump cleaning
adapter
AutoOiler
™
button
PRIME/SPRA
Y
knob
Cart knob (2)
Grounding
cable
Shutoff switch
Spray
guard
Spray tip
1. Make sure the gas tank s fu .
Move the choke ever (a) up to
the fu choke pos t on.
2. Push the rubber pr me button
(b) 7-10 t mes.
3. Pu the starter rope (c) rap d y
and firm y. Cont nue to ho d
the rope as you et t return.
Pu and return the rope unt
the eng ne starts.
4. Once the eng ne s runn ng,
s ow y move the choke
ever (d) down to the c osed
pos t on.
Starting the engine:
Follow these steps to start the
engine when it is “cold”, or has
not been recently running.
If the engine is “warm”, follow
step 3 only.
ImPORTANT: Do not pull starter
cord to full extension. Doing
so may result in damage to
the engine recoil, and is not
necessary to start this engine.
(a)
1
(b)
2
(c)
3
(d)
4
