Preparing the spray gun
03/2008
0351709
- PEM-T3
7
2.
Preparing the spray gun
2.1
Select the suitable nozzle system
0201_Duesenauswahl_tribo.doc
Nozzle
Overview Application
Spray pattern
Deflector cone
•
Wire goods
•
Grid designs
Oval powder cloud:
Size is dependent on the deflector
cone diameter.
For powder quantities from:
50 ... 300 g/min
Fan spray nozzle
Difficult workpieces:
•
Undercuts
•
Profiles
Widely spread flat powder cloud.
For powder quantities:
from 50 ... 150 g/min
Wide fan spray
nozzle
Difficult workpieces:
•
Undercuts
•
Profiles
Widely spread flat powder cloud.
For powder quantities:
from 100 ... 250 g/min
The part numbers are listed in chapter
8
"
Scope of delivery and spare parts lists
".
2.2
Connecting the spray gun
Before you start making connections, switch off the powder feeding. Refer to the
operating instructions of the corresponding control unit for this.
to the electrical connection
Powder feed
Tribo air
from the powder injector
at the control unit
from the control unit
pemt3_0003
Summary of Contents for PEM-T3
Page 24: ...Notes 24 0351709 PEM T3 03 2008...
Page 25: ...Notes 03 2008 0351709 PEM T3 25...
