Preparing the spray gun
8
0351709
- PEM-T3
03/2008
•
Connect the spray gun to the Tribo current measuring or display module with the electrical
cable.
•
Connect the powder hose to the spray gun and to the powder injector.
•
Connect the hose for Tribo air to the spray gun and to the control unit.
2.3 Grounding
For safety reasons, the
spray gun
must
be properly grounded. This occurs through the
electrical cable.
0203_ .doc
Good grounding of the
workpiece
is also necessary for optimum powder coating.
A poorly grounded workpiece causes:
•
dangerous electric charging of the workpiece
•
back-spray onto spray gun and user
•
uneven coating
•
very bad wrap around
Warning
Sparks between workpiece and conveyor hooks (hangers) can occur if hooks or
other hanger parts are not completely cleaned!
These sparks can cause heavy radio frequency interference.
Summary of Contents for PEM-T3
Page 24: ...Notes 24 0351709 PEM T3 03 2008...
Page 25: ...Notes 03 2008 0351709 PEM T3 25...
