Preparing the spray gun
12
0351701
- PEA-T3XL
05 / 2009
2.4 Grounding
For safety reasons, the
spray gun
must
be properly grounded. This occurs through the
grounding screw.
0203_ .doc
Good grounding of the
workpiece
is also necessary for optimum powder coating.
A poorly grounded workpiece causes:
•
dangerous electric charging of the workpiece
•
back-spray onto spray gun and user
•
uneven coating
•
very bad wrap around
Warning
Sparks between workpiece and conveyor hooks (hangers) can occur if hooks or
other hanger parts are not completely cleaned!
These sparks can cause heavy radio frequency interference.
