Preparing the spray gun
10
0351701
- PEA-T3XL
05 / 2009
Crossed finger nozzles
1
Z1
Complicated profiles
•
for uniform coating thickness
Directed spray with:
the standard nozzle
1
or
powder shower
3
3
For powder quantities
from:
100 ... 200 g/min
Note that the installation dimensions
Z
(as described on page 2) changes when using finger
nozzles. The finger nozzle has a length of:
Z1
= 315 mm.
The following result applies e.g. to the
PEA-T3XL 1.4
:
Z
= 1475 - 46 +
Z1
= 1429 + 315 =
1744 mm
Article numbers and other information on nozzle systems are to found in chapter
9.3.5
"
Finger
nozzles
".
2.2
Handling of the hose coupling
Loosen the hose coupling:
1. Lift the O-ring 1 out of the groove and slide it towards spray gun.
2. Turning the locking nut 2 in a clockwise direction up to the stop and pull the hose coupling 3
out of the coupling piece 4.
Connecting the hose coupling:
3. Insert the hose coupling 3 into the coupling piece 4 and turning the locking nut 2
counterclockwise up to the stop.
4. Press the O-ring 1 into the groove again (securing function).
3
2
1
P_00748
4
Hint
Slide the powder hose as much as possible up to the stop onto the hose coupling!
