manualshive.com logo in svg

WAGNER GM 4700AC, Operating Manual

Share
Download
WAGNER GM 4700AC Operating Manual Download Page 34

34

GM 4700AC

 

B_02261

x

A

B

C

D

B_02384

OPERATING MANUAL

VERSION 06/2014

ORDER NUMBER DOC2311730

For disassembly and assembly of AirCoat nozzles, see section 7.3.4.
AirCoat nozzle (C) can be placed into a cleaning solvent which has been recommended by 
the paint manufacturer.

1.

Relieve the pressure of the spray gun and device.

2.

Secure the spray gun with the locking device.

3.

Unscrew the union nut with nozzle guard (A).

4.

Remove air cap (B).

5.

Push AirCoat nozzle (C) out of air cap (B) by hand and place on nozzle seal (D) the 
other way round with the nozzle tip towards the rear.

6.

Refi t air cap (B) on nozzle (C). Note the fl attened parts (X) on the nozzle and in the 
air cap.

7.

Screw the union nut with nozzle guard (A) over the air cap (B) onto the spray gun 
and tighten by hand.

8.

Switch the product pressure back on.

9.

Turn the locking device to the spraying position and briefl y pull trigger.

10. When the blockage has been fl ushed out, secure the spray gun with the trigger 

guard locking device.

11. Relieve the pressure of the spray gun and device.
12. Unscrew the union nut with nozzle guard (A).
13. Remove air cap (B) and push AirCoat nozzle (C) out by hand. Clean the nozzle and 

put it back on nozzle seal (D) in the spray position.

14. Refi t air cap (B) on nozzle (C).

Note the fl attened parts (X) on the nozzle and in the air cap.

15. Screw the union nut with nozzle guard (A) over the air cap (B) onto the spray gun 

and tighten by hand.

16. Switch the product pressure and the air pressure back on.

Nozzle in spray position

Nozzle in cleaning position

7.3.5 

CLEANING AIRCOAT NOZZLE

7.3.6 

ELIMINATE NOZZLE CLOGGING

Summary of Contents for GM 4700AC

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands