WAGNER Cobra 40-10/2K, Translation Of The Original Operating Manual

Page: 30 / 80

30
"?
OPERATING MANUAL
VERSION 07/2014
ORDER NUMBER DOC2349980
Cable cross sections
Pump 4 mm2;
Paint tank 6 mm2;
Conveyor 16 mm2;
Booth 16 mm2;
Spraying stand 16 mm2;
Procedure:
1 Screw on grounding cable with eye.
2 Clamp the grounding cable clip to a grounding
connection on site.
3 Ground the product (paint) tank to an on-site
grounding connection.
4 Ground the other parts of the system to an on-site
grounding connection.
Carry out safety checks in accordance with Chapter 8.2.3.
6.7
SAFETY CHECKS
Before every start-up, the following points should be observed:
- Secure gun with safety clip.
- Check the permissible pressures.
- Check all connections for leaks.
- Check hoses for damage.
It should be ensured that the device is in the following state before carrying out any
work on it:
- The pressure should be released from the pump and high-pressure hose with gun.
- The gun should be secured with the safety clip.
- The air supply should be interrupted.
Overpressure!
Risk of injury from bursting components.
The operating pressure must not exceed the value shown on
the type plate.
WARNING
Pressure tightness test
For pressure tightness control of the entire installation, the fl ushing agent product
pressure is slowly increased step by step until the product pressure of the pump
indicated on the type plate is reached.