WAGNER Basic 8000, Translation Of The Original Operating Manual

Page: 7 / 36

7
Basic 8000 .
OPERATING MANUAL
VERSION 12/2010 ORDER NUMBER DOC 3305595
2.2.1
SAFE HANDLING OF WAGNER POWDER SPRAY UNITS
2.2.2
GROUNDING THE UNIT
2.2.3
MATERIAL HOSES
2.2
SAFETY INSTRUCTIONS FOR STAFF
➞
Only use original Wagner powder hose.
œ
Always follow the information in these instructions, particularly the general safety
instructions and the warning instructions.
œ
Always follow local regulations concerning occupational safety and accident
prevention.
œ
Under no circumstances should persons with pacemakers be in the area where the
high-voltage field between the spray gun and the workpiece to be coated builds up!
œ Never point the powder spray gun at people.
œ Before all work on the unit, in the event of work interruptions and functional faults:
– Switch off the energy/compressed air supply.
– Secure the powder spray gun against actuation.
– Relieve the pressure from the powder spray gun and unit.
– By functional faults: Identify and correct the problem, proceed as described in chap.
“Trouble shooting“.
The electrostatic charge may, in certain cases, give rise to electrostatic charges on the
device. These can involve with unloading transmitting or flame formation.
ª
Ensure that the device is grounded before each coating process.
ª
Earth the workpieces being painted.
ª
Ensure that all persons inside the working area are earthed, e.g. that they are wearing
antistatic shoes.
ª
Grounding cables must be checked regularly to ensure that they are serviceable
(see EN 60204).