![background image](http://html.mh-extra.com/html/wagan/elite-200w-pro/elite-200w-pro_user-manual_867582008.webp)
Elite
™
200W PRO by Wagan Tech
®
7
www.wagan.com
immediate overload shut down and or blow a fuse. The fuse on this inverter is
external and replaceable for this purpose.
CONNECTINg THE INVERTER
DC Plug Adapter Cord
1. Connect the red (+) and black (−) terminals of the supplied DC Plug Adapter
Cord to the red (+) and black (−) terminals on the rear of the inverter.
• Be sure to connect them into the correct polarity terminals on the rear
of the inverter. Reverse polarity connection will blow the fuse in the
inverter and can permanently damage to the inverter. Damage caused
by reverse polarity will void the warranty.
2. Connect the Plug end of the DC Adapter Cable into your vehicle’s 12V DC
accessory outlet. You may need to place the ignition switch to Accessory
Position if the vehicle engine is not operating.
3. Plug the AC appliance cord into the inverter’s AC receptacle, and/or your
USB appliance into the USB power port.
4. Place the ON/OFF power switch in the “ON” position. The green lED
should turn on, indicating the inverter is powered and operating normally.
5. When the inverter is not in use, place the inverter’s ON/OFF Power Switch
to the “OFF” position. We recommend also unplugging the DC Adapter
cable from the vehicle’s DC outlet.
OPERATINg ISSUES: TElEVISION AND AUDIO
EqUIPMENT SUggESTIONS.
Although all inverters are shielded and filtered to minimize signal interference,
some interference with your television picture may be unavoidable, especially
with weak signals. However, here are some suggestions that may improve
reception.