Waferlock C210 User Manual Download Page 5

Standalone Mode Programming Instruction 

Touch the 

WAFERLOCK

 logo for 1 second 

until the Green light flashes 2 times. 

Rotate the knob with the number to the twelve 

o’clock position, the number will blink. Once the 

light is steady, it means the number is chosen.

Unlock With The Combination

2

1

Your Warranty

Your Warranty covers all manufacturers' defects in workmanship 

and material. It does not cover any unit that is damaged beyond 

normal usage, by improper installations, by contacts to chemicals, 

or any other acts or omissions unsanctioned within the user 

manual. All components are covered for one (1) year after the 

date of purchase or installation from supplier. The user is required 

to provide dated proof of purchase. Waferlock or its authorized 

distributor will determine if there is a warrantable condition 

associated with material and/or manufacturing workmanship. 

If the lock conforms to the warranty conditions, the lock will be 

repaired free of charge. The shipping freights would be at 

owner's expense. The warranty does not include any further 

obligation whatsoever, including but not limited to the installation 

of the replacement unit to the customer's lock. All other warranties, 

express or implied, are disclaimed. All collateral agreements, 

which purport to modify this limited warranty, are of no effect.

WAFERLOCK CORPORATION

Tel: 886-4-24620208    Fax: 886-4-24636286
No. 16 Ke Yuan 2nd Rd., Central Taiwan Science Park 
Taichung city 407, Taiwan.
E-mail: [email protected]

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation

.

This equipment generates, uses and can radiate radio frequency

 

energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference

 

will not occur in a particular installation. If this equipment does

 

cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one

 

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver

.

• Connect the equipment into an outlet on a circuit different  

  from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician 

  for help.

FCC Caution: 

To assure continued compliance, any changes 

or modifications not expressly approved by the party responsible

 

for compliance could void the user's authority to operate this 

equipment. (Example - use only shielded interface cables 

when connecting to computer or peripheral devices). 

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: (1) This 

device may not cause harmful interference, and (2) This device

 

must accept any interference received, including interference 

that may cause undesired operation.

After 4-6 digits are correctly chosen, rotate the

knob with # to the twelve o’clock position until 

the numbers flash in order 2 times.

If incorrect codes are entered for 5 times, the combination 

feature will be disabled for 3 minutes with 2 short beeps 

and the red light flashes 2 times.
If enter the invalid code 1 time after 3 minutes, the 

combination feature will be disabled for 3 minutes again.
Only authorized access can lift the prohibition or until 

3 minutes pass

Note

3

Initially, tap the programming card on the 

reader, then there will be 2 beeps and green 

light starts flashing. Re-do the same 

procedure for second time, there will be 

2 beeps and green light keep flashing.
For the third time, follow the former same 

steps, and keep tapping card for around 5 

seconds until a long beep occurs. The red 

light will flash 5 times, and all user cards 

have been deleted.
have been deleted.

To delete all users

1

Red X 5

3 times

Programming

1.  

2. 

3. 

Summary of Contents for C210


























Reviews: