2.
1.
Programming card is used to add/delete user
cards/badges, but not be used to unlock the padlocks.
3. Any MIFARE card will be able to unlock the padlock
before it is programmed.
4. There is only ONE programming card per padlock.
Please keep it safely.
5. You can use one programming card for multiple
padlocks.
Set Up The Programming Card
Lock Setup with App
Note
If 2 short beeps occur with the red light flashing
2 times, the setup was not successful.
Please re-program.
Note
1. The WAFERKEY App works on iPhone with iOS
13.6 or later, or devices with Android 8.0 or later.
2. Be sure to accept any available firmware update.
3. Please refer to the instruction in
WAFERKEY
App
for more information.
4. Once the lock turns to App Mode, ALL the existing
user access settings (Key Card, Passcode ...) will be
deleted.
Note
Tap the programming card on the reader,
the red light will start flashing for 10 seconds
until "1 long beep sound" followed by the
green light flashing 3 times.
Within these 10 seconds, do not remove the
programming card away from the reader.
Red
Green X 3
1
Open the App, simply use a Third Party Login
or register a
WAFERKEY
account.
Make sure the lock has been already
programmed by the programming card.
Turn on Bluetooth on your smartphone,
stay near the lock and follow the instruction
in the App.
2
3
Pair the lock in the App and start to use it.
4
1 “beep” sound
10 “beep” sound
Download the App by searching “
WAFERKEY
”
in the App Store (iOS) or on Google Play
(Android).
1
The Programming Card must be linked to the
lock before any other steps can take place.
Follow below steps to get your lock setup with
WAFERKEY
App. You can also use the mobile
App to set up your lock step-by-step and access
installation videos.
Questions about your new lock?
Let us help you!
DON’T WANT TO USE THE APP?
Please go to Standalone Mode page for manual
programming instructions.
10
s
ec
Programming
10
s
ec
Programming
Programming