Waeco Refresh-o-mat HD, Operating Manual

Page: 14 / 300

EN
Operation Refresh-o-mat HD
14
7.2 Cleaning the interior
I
Use the Refresh-o-mat to clean the interior of the vehicle as described in
chapter “Cleaning the air-conditioning unit” on page 12.
1. Set up the Refresh-o-mat without a hose, pointing into the interior of the
vehicle.
2. Connect the Refresh-o-mat to the power supply.
!
3. Press “START/STOP” once (fig.
9
, page 4), to start the cleaning proce-
dure with 100 ml of fluid.
✔
The “READY/ON” LED lights up green.
I
4. Get out of the vehicle and close the doors.
5. The Refresh-o-mat stops automatically after approx. 20 minutes when
the fluid reaches a minimum level.
6. Press “START/STOP” once, to end the cleaning procedure prematurely.
7. Disconnect from the power supply.
8. Open all vehicle doors and allow the vehicle interior to air for approx.
30 minutes.
7.3 Cleaning the outer air intake ducts
(only with adapter kit accessory)
I
NOTE
Only use Dometic WAECO’s own Car Refresh interior cleaning
agent.
CAUTION! Health hazard
Do not breathe in the spray.
NOTE
For a cleaning procedure with 400 ml of fluid, press “START/
STOP” twice. All three LEDs flash briefly to confirm.
NOTE
 To completely remove odors in vehicles, the outer air ducts
also have to be cleaned. The adapter kit (ref. no. 8885300097)
can be used to do this.
 Only use Dometic WAECO’s own AirCon Refresh air-condi-
tioning cleaning agent.