Waeco PerfectView MC402, Installation And Operating Manual

Page: 15 / 68

EN
MC402 Safety information
15
2.2 Operating the device safely
!
WARNING!
 Never play videos while you are driving to avoid dangerous sit-
uations in road traffic. Adhere to the country-specific laws and
regulations.
 Only use the device in its function as a reversing video system
while driving. The driver must not look at the monitor under any
circumstances while driving along. This could distract the driver
and lead to a serious accident.

Adjust the volume of the device so that noise from traffic, partic-
ularly horns and beeps, are still able to be heard.
 Protect the device from humidity and moisture to prevent
sparks, fire or electric shocks.
 Switch off the device immediately
– if water gets into the device,
– if smoke is coming out of the device or
– if the device emits an unusual smell.
 This reader is certified according to the laser protection class 1.
The accessible laser radiation is safe under reasonably foresee-
able conditions. Avoid looking directly into the laser beam.
Never open the housing of the device. Do not make any repairs
to the device. Contact the manufacturer (see addresses on the
back of the operating manual).
I
NOTICE!
 If you use the monitor in vehicles, the vehicle should be running
during operation to prevent the vehicle battery from discharging.
 Only insert round discs into the device.
Do not use any other shaped discs.
 Only clean the discs with a soft, dry cloth from the middle to the
outer edge. To remove dirt, use a mild cleaning agent.
 New discs may have flaking on the edges. Remove these by
carefully running the side of a ballpoint pen around the edge.

If the interior of the vehicle becomes too hot e.g. as a result of
direct sunlight, wait until the temperature has cooled down to
the operating temperature (under 60 °C).