Mounting the LCD monitor
PerfectView M5L, M7L, M7LX
32
Observe the following instructions when laying the connection cable:
z
Feed the connection cable through existing ducts or other openings where
possible, e. g. ventilation grilles. If no suitable ducts or openings are available
you will need to drill a hole of
∅
20 mm. Check beforehand that there is sufficient
space on the other side for the drill head to emerge (fig.
2
, page 3).
z
To prevent damage to the cables, when laying them ensure that there is always
a sufficient interval to vehicle components which can become hot (lights,
heaters, ventilators etc.).
z
Wrap insulating tape around every connection on the cable (even inside the
vehicle).
z
When laying the cables, make sure:
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp-edged ducts without protection (fig.
3
, page 3).
Connecting the monitor as a reversing video system (fig.
d
, page 7)
➤
Lay the connection cable for the monitor bracket on the dashboard.
➤
Insert the plug of the monitor cable (
2
) into the socket (
4
) of the connection
cable (
3
).
A
NOTICE! Risk of damage
Make sure the polarity is correct when connecting to a voltage source.
➤
Connect the red and black cables of the connection cable to a suitable voltage
supply:
– Connect the red cable (
5
) to terminal 15 (ignition).
– Connect the black cable (
6
) to terminal 31 (earth).
➤
If the monitor is to be activated when reverse gear is selected, connect the green
cable (
8
) to the positive cable of the reversing light.
I
NOTE
If voltage is present in the green cable (
8
), the reversing camera will be
activated automatically. The reversing camera has priority.
➤
If the monitor is to be activated e. g. when the indicator is flashing, connect the
following control cable to a positive cable of the indicator:
–
M5L, M7L:
white cable (
8
)
–
M7LX:
white cable (
8
), blue cable (
13
)
I
NOTE
If voltage is present in this control cable, the following video input will be
activated:
z
M5L, M7L:
video input C2
z
M7LX:
video input C2, video input C3
_M5L_M7L_M7LX.book Seite 32 Donnerstag, 14. Januar 2010 3:03 15
