Waeco PerfectView M55LX, Installation And Operating Manual

Page: 32 / 256

Installing the LCD monitor PerfectView M55LX, M75LX
EN
32
7.3 Connecting the monitor electrically
The circuit diagram for the LCD monitor can be found in fig. d , page 8:
A
No. Description
1 Monitor
2 20-pin socket
3 Monitor line
4 20-pin plug
5 12 – 24 V positive cable (red): connected to the positive pole of the
ignition (connected positive, terminal 5) or the positive pole of the
battery (terminal 30).
6 Earth cable (black): connected to the negative pole of the voltage
source.
7 Cable (green): control input for video input CAM1,
such as for connecting the reversing light
8 Cable (white): control input for video input CAM2,
such as for the side camera
9 6-pin CAM1 socket (connection to video source 1)
10 6-pin CAM2 socket (connection to video source 2)
11 6-pin CAM3 socket (connection to video source 3)
with video signal detection
12 6-pin CAM4 socket (connection to video source 4),
with video signal detection)
13 Cable (blue): control input for video input CAM3
If the system is activated via this control line, none of the buttons
have a function (according to DIN EN 1501-1).
NOTICE!
Cables and connections that are not properly installed will cause malfunctions
or damage to components.
Correct installation of cables and connections ensures lasting and trouble-free
operation of the retrofitted components.