29
Installation
CoolAir
z
You can connect the unit to the battery via the lorry's terminal block or
directly. The terminal block is to be preferred for the connection. On
some vehicles, larger consumers connected to the terminal block are
switched off after a short while if the power requirement is too high.
Ask your vehicle manufacturer for the specifications of the terminal
block.
z
Note the connection plan for the air conditioning roof unit:
a
Caution
Improper installation of the air conditioning roof unit can result in irrepa-
rable damage to the device and put the safety of the user at risk.
The manufacturer will not be held liable for claims if the air conditioning
roof unit is not installed according to this installation manual. That applies
to malfunctions and the safety of the air conditioning roof unit, in particular
to injuries and damage to property.
a
Caution
Before installing the air conditioning roof unit, all connections to the
battery of the vehicle must be disconnected.
Non-observance of this regulation can result in danger of electrocution.
I
Note
After installing the unit, the specified parameters of the unit software must
be checked (see Chapter "Configuration of unit software" on page 33).
No. in fig.
8
on
page 6
Designation
1
Control pad
2
Connection cable
3
Room temperature sensor
4
Earth
5
Klickson (compressor)
6
Compressor
7
Condenser fan
8
Vaporiser fan
9
Earth
10
25 A fuse
CA-850S_EBA.book Seite 29 Mittwoch, 8. September 2010 7:31 19
Summary of Contents for Coolair CA850S
Page 3: ...3 CoolAir 179 276 353 1 830 2 1 3 CA 850S_EBA book Seite 3 Mittwoch 8 September 2010 7 31 19...
Page 4: ...CoolAir 4 4 1 2 3 4 7 6 5 5 CA 850S_EBA book Seite 4 Mittwoch 8 September 2010 7 31 19...
Page 5: ...5 CoolAir 6 1 6 2 3 4 5 8 7 7 CA 850S_EBA book Seite 5 Mittwoch 8 September 2010 7 31 19...
