Waeco CFX35, Operating Manual

Page: 39 / 296

EN
CFX35 – CFX65DZ Cleaning and maintenance
39
6.13 Replacing the light PCB
➤
Pry out the transparent cover with a screwdriver (fig. 8 1,
page 5).
➤
Unscrew the PCB mounting screws (fig. 8 2, page 5).
➤
Pull out the plug from the PCB (fig. 8 3, page 5).
➤
Replace the defective light PCB with a new one.
➤
Fit new PCB using reverse of removal instructions.
➤
Press the transparent cover back into the housing.
7 Cleaning and maintenance
!
WARNING!
Always disconnect the device from the mains before you clean and
service it.
A
NOTICE! Risk of damage
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤
Occasionally clean the device interior and exterior with a damp
cloth.
8 Guarantee
The statutory warranty period applies. If the product is defective,
please contact the manufacturer's branch in your country (see the
back of the instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following
documents when you send in the device:

A copy of the receipt with purchasing date

A reason for the claim or description of the fault